| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| 3degree v 5degree bridge pins http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=7640 |
Page 1 of 1 |
| Author: | bob J [ Fri Jul 21, 2006 9:27 pm ] |
| Post subject: | |
Which are the best or most used bridge pins, 3 degree or 5 degree. Thanks, |
|
| Author: | Mark Tripp [ Sat Jul 22, 2006 7:17 am ] |
| Post subject: | |
I also use the 5 degree slotless pins. I really like them. Not sure if 3 -5 degrees makes a difference but I definitely like slotless... -Mark |
|
| Author: | paul harrell [ Sat Jul 22, 2006 8:25 am ] |
| Post subject: | |
Another vote for the Stew-Mac slotless 5 degree pins, with the slotless part much more important than the 5 degrees. Paul |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|